CeraVe Hydrating Mineral Sunscreen SPF 30 Face Sheer Tint Shade: Light ingredients (Explained) (2024)

Water

Also-called: Aqua | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product.

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water.

Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying.

One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time.

C12-15 Alkyl Benzoate

What-it-does: emollient, antimicrobial/antibacterial

An often used emollient with a light and silky feel. It's very mild to both skin and eyes and spreads nicely and easily. It's often used in sunscreens as it's also an excellent solvent for sunscreen agents.

Isohexadecane

What-it-does: emollient, solvent

A light, velvety, unique skin feel liquid that is a good solvent and also makes the skin feel nice and smooth (aka emollient). It's often used in makeup products mixed with silicones to give shine and slip to the product. It's also great forcleansing dirt and oil from the skin as well as for taking off make-up.

Isononyl Isononanoate

What-it-does: emollient

An emollient ester with a rich and creamy but non-greasy skin feel. It makes skin supple and protects dry skin.

Dicaprylyl Ether

What-it-does: emollient, solvent

A clear, colorless and odorless oily liquid that works as a fast-spreadingemollient with a dry skin feel.

PEG-30 Dipolyhydroxystearate

What-it-does: emulsifying

PEG-30 Dipolyhydroxystearate is a popular water-in-oil (w/o) emulsifier, meaning that it helps the oily and watery parts of the formula to mixin a way where water droplets are dispersed in the continuous oil phase and not theother way round.

Compared to the more commonly used oil-in-water (o/w) emulsions, w/o emulsions tend to be heavier and less cosmetically elegant, butPEG-30 Dipolyhydroxystearate is claimed to help with this and enablesa light and elegant skin feel. It also has a molecular structure that creates large anchors both in the water and in the oil phase making the resulting emulsion not only cosmetically elegant but also very stable.

Triethylhexanoin

What-it-does: emollient, perfuming

Triethylhexanoin is a colorless to pale yellow liquid ester that makes the skin nice and smooth, aka emollient. It has a pleasant non-sticky, non-greasy feel to it, gives formulassmooth application properties and also helps moisture retention.

Polyglyceryl-4 Isostearate

What-it-does: emulsifying

CeraVe Hydrating Mineral Sunscreen SPF 30 Face Sheer Tint Shade: Light ingredients (Explained) (1) We don't have description for this ingredient yet.

Dicaprylyl Carbonate

What-it-does: emollient

A clear, colorless, almost odorless oil that spreads nicely and easily and givesa velvet dry skin feel. It is good friends with sunscreen agents and helps to solubilize them. Also, it makes sunscreens feel lighter and spread easier.

Poly C10-30 Alkyl Acrylate

What-it-does: emulsion stabilising, viscosity controlling

CeraVe Hydrating Mineral Sunscreen SPF 30 Face Sheer Tint Shade: Light ingredients (Explained) (2) We don't have description for this ingredient yet.

Stearic Acid

What-it-does: emollient, viscosity controlling | Irritancy: 0 | Comedogenicity: 2-3

A common multi-tasker fatty acid. It makes your skin feel nice and smooth (emollient), gives body to cream type products and helps to stabilize water and oilmixes (aka emulsions).

Ceramide NP - goodie

Also-called: Ceramide 3 | What-it-does: skin-identical ingredient

One of the many types of ceramides that can be found naturally in the upper layer of the skin. Ceramides make upabout 50% of the goopy stuff that's between our skin cells and play a super important role in having a healthy skin barrier and keeping the skin hydrated. It works even better when combined with its pal, Ceramide1.

We wrote way more about ceramides at ceramide 1, so click here to know more.

Ceramide AP - goodie

Also-called: Ceramide 6 II | What-it-does: skin-identical ingredient

A typeof ceramidethat can be found naturally in the upper layer of the skin. Ceramides make up 50% of the goopy stuff that's between our skin cells and play a super important role in having a healthy skin barrier and keeping the skin hydrated.

We have written way more about ceramides at ceramide 1, so click here to know more.

Ceramide EOP - goodie

Also-called: Ceramide 1 | What-it-does: skin-identical ingredient

Ceramides get quite a lot of hype recently and good news: there is a reason for that. But before we go into the details, let's just quickly define what the heck ceramides are:

They are waxy lipids that can be found naturally in the outer layer of the skin (called stratum corneum - SC). And they are there in big amounts! The goopy stuff between our skin cells is called extracellular matrix that consists mainly of lipids. And ceramides are about 50% of those lipids (the other important ones are cholesterol with 25% and fatty acids with 15%).

Ok, so now we know what ceramides are, let's see what they do in our skin: research shows clearly that they play a super important role in keeping the skin barrier healthy and the skin hydrated. If ceramides in the skin are decreased, more water can evaporate from the skin and there is less water remaining in the skin. So ceramides form kind of a "water-proof" protecting layerand make sure that our skin remains nice and hydrated.

Now the question is only this: If we put ceramides all over our face do theywork as well as ceramides already naturally in our skin? Well, the answer is probably a no, but they do work to some extent. The BeautyBrains blog made a fantastic article about ceramides and they have listed a couple of examples about studies showing that ceramides - especially when used in certain ratios with cholesterol and fatty acids - do hydrate the skin and can help to repair the skin barrier.

So far we were writing about ceramides in plural. It's because there are lots of different ceramides, a 2014article writes that currently 12 base classes of ceramides are known with over 340 specific species.Chemically speaking, ceramides are the connection of a fatty acid and a sphingoid base and both parts can have different variations that result in the different types of ceramides.

Our current one, Ceramide 1, or morerecently called CeramideEOP, was the first one that was identified in 1982 and it's a special snowflake. It contains the essential fatty acid, linoleic acid and has a unique structure. It's believed that ceramide 1 plays a "binding role" in the lipid layers of the extracellular matrix. Along with ceramides 4 and 7, they also play a vital role in epidermal integrity and serve as the main storage areas for linoleic acid (a fatty acid that's alsovery important for barrier repair).

Oh, and one more thing: alkaline pH inhibits enzymes that help ceramide synthesis in our skin. So if you use a soap and you notice your skin is becoming dry, now you know why.

Carbomer

What-it-does: viscosity controlling, emulsion stabilising | Irritancy: 0 | Comedogenicity: 1

A big molecule created from repeated subunits (a polymer of acrylic acid) that magically converts a liquidinto a nice gel formula. It usually has to be neutralized with a base (such as sodium hydroxide) for the thickening to occur and it creates viscous, clear gels that also feel nice and non-tacky on the skin. No wonder, it is a very popular and common ingredient. Typically used at 1% or less in most formulations.

Niacinamide - superstar

Also-called: vitamin B3, nicotinamide | What-it-does: cell-communicating ingredient, skin brightening, anti-acne, moisturizer/humectant

  • A multi-functional skincare superstar with several proven benefits for the skin
  • Great anti-aging, wrinkle smoothing ingredient used at 4-5% concentration
  • Fades brown spots alone or in combination with amino sugar, acetyl glucosamine
  • Increases ceramide synthesis that results in a stronger, healthier skin barrier and better skin hydration
  • Can help to improve several skin conditions including acne, rosacea, and atopic dermatitis

Read all the geeky details about Niacinamide here >>

Glycine Soja (Soybean) Oil - goodie

Also-called: Soybean Oil | What-it-does: emollient, perfuming | Irritancy: 0 | Comedogenicity: 3

The emollient plant oil coming from the soybean. It is considered to be a nice, cost-effective base oil with moisturizing properties. As for its fatty acid profile, it contains 48-59% barrier-repairing linoleic acid, 17-30% nourishing oleic acid and also some (4.5-11%) potentially anti-inflammatory linolenic acid.

Cetearyl Alcohol

What-it-does: emollient, viscosity controlling, emulsifying, emulsion stabilising, surfactant/cleansing | Irritancy: 1 | Comedogenicity: 2

An extremely common multitasker ingredient that gives your skin a nice soft feel (emollient) and gives body to creams and lotions. It also helps to stabilize oil-water mixes (emulsions), though it does not function as an emulsifier in itself. Its typical use level in most cream type formulas is 2-3%.

It’s a so-called fatty alcohol, a mix of cetyl and stearyl alcohol, other two emollient fatty alcohols. Though chemically speaking, it is alcohol (as in, it has an -OH group in its molecule), its properties are totally different from the properties of low molecular weight or drying alcohols such as denat. alcohol. Fatty alcohols have a long oil-soluble (and thus emollient) tailpart that makes them absolutelynon-drying and non-irritating and are totally ok for the skin.

Triethoxycaprylylsilane

A clear, light yellow liquid that is used to coat pigments (such as inorganic sunscreen agents or colorants) in cosmetic products. The coating helps to stabilize pigments in the formulas and also helps them to spread easily and evenly on the skin.

Behentrimonium Methosulfate

What-it-does: surfactant/cleansing

In itself, it's an antistatic (stops your hair from flying around because of electricity), hair conditioning and softening ingredient used mainly in haircare products.

Coupled withCetearyl Alcohol, they form an easy to handle, super stable emulsifier duo that hasexceptional spreadability and gives a pleasantfinal touch to the products.

Triethyl Citrate

What-it-does: perfuming

CeraVe Hydrating Mineral Sunscreen SPF 30 Face Sheer Tint Shade: Light ingredients (Explained) (3) We don't have description for this ingredient yet.

Sodium Chloride

Also-called: Salt | What-it-does: viscosity controlling

Sodium chloride is the fancy name of salt. Normal, everyday table salt.

If (similar to us) you are in the weird habit of reading the label on your shower gel while taking a shower, you might have noticed that sodium chloride is almost always on the ingredient list. The reason for this is that salt acts as a fantastic thickener in cleansing formulas created with ionic cleansing agents(aka surfactants) such as Sodium Laureth Sulfate. A couple of percents (typically 1-3%) turns a runny surfactant solution into a nice gel texture.

If you are into chemistry (if not, we understand, just skip this paragraph), the reason is that electrolytes (you know, the Na+ and Cl- ions) screen the electrostatic repulsion between the head groups of ionic surfactants and thus support the formation of long shaped micelles (instead of spherical ones) that entangle like spaghetti, and viola, a gel is formed. However, too much of it causes the phenomenon called "salting out", and the surfactant solution goes runny again.

Other than that, salt also works as an emulsion stabilizer inwater-in-oil emulsions, that is when water droplets are dispersed in the outer oil (or silicone) phase. And last but not least, when salt is right at the first spot of the ingredient list (and is not dissolved), the product is usually a body scrub where salt is thephysical exfoliating agent.

Sodium Hyaluronate - goodie

What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0

It’s the - sodium form - cousin of the famous NMF,hyaluronic acid(HA). If HA does not tell you anything we have a super detailed, geeky explanation about it here. The TL; DR version of HA is that it's a huge polymer (big molecule from repeated subunits) found in the skin that acts as a sponge helping the skin to hold onto water, being plump and elastic. HA is famous for its crazy water holding capacity as it can bind up to 1000 times its own weight in water.

As far as skincare goes, sodium hyaluronate and hyaluronic acid are pretty much the same and the two names are used interchangeably. As cosmetic chemist kindofstephenwrites on reddit "sodium hyaluronate disassociates into hyaluronic acid molecule and a sodium atom in solution".

In spite of this, if you search for "hyaluronic acid vs sodium hyaluronate" you will find on multiple places that sodium hyaluronate is smaller and can penetrate the skin better. Chemically, this is definitely not true, as the two forms are almost the same, both are polymers and the subunits can be repeated in both forms as much as you like. (We also checkedProspector for sodium hyaluronate versions actually used in cosmetic products and found that the most common molecular weight was 1.5-1.8 million Da that absolutely counts as high molecular weight).

What seems to be a true difference, though, is that the salt form is more stable, easier to formulate andcheaper so it pops up more often on the ingredient lists.

If you wanna become a real HA-and-the-skin expert you can read way more about the topic at hyaluronic acid(including penetration-questions, differences between high and low molecular weight versions and a bunch of references to scientific literature).

Sodium Lauroyl Lactylate

What-it-does: emulsifying

A helper ingredient that's used as a co-emulsifier (meaning next to other emulsifiers in the formula it helps water and oil to mix) and as a stabilization agent for foams. Also, has some antimicrobial activity so it can help to boost the effectiveness of the preservative system.

Cholesterol - goodie

What-it-does: skin-identical ingredient, emollient | Irritancy: 0 | Comedogenicity: 0

It's one of the important lipids that can be found naturally in the outer layer of the skin. About 25% of the goopy stuff between our skin cells consists of cholesterol. Together with ceramides and fatty acids, they play a vital role in having a healthy skin barrier and keeping the skin hydrated.

Apart from being an important skin-identical ingredient, it's also an emollient and stabilizer.

Aluminum Stearate

What-it-does: colorant, emulsion stabilising, viscosity controlling

CeraVe Hydrating Mineral Sunscreen SPF 30 Face Sheer Tint Shade: Light ingredients (Explained) (4) We don't have description for this ingredient yet.

Alumina

Also-called: Aluminum Oxide, Al2O3 | What-it-does: viscosity controlling, absorbent/mattifier, abrasive/scrub

A multi-functionalhelper ingredient that's used mainly as a pigment carrier. The pigment can be an inorganic sunscreen(such as titanium dioxide) or a colorant that is blended withalumina platelets and then often coated with some kind of silicone (such as triethoxycaprylylsilane). This special treatment enables pigments to be evenly dispersed in the formulaand to be spread out easily and evenly upon application. It is super useful both for mineral sunscreens as well as for makeup products.

Other than that, alumina can also beused as an absorbent (sometimes combined with the mattifying powder called polymethylsilsesquioxane), a viscosity controlling or an opacifying (reduces the transparency of the formula) agent.

Aluminum Hydroxide

What-it-does: emollient, moisturizer/humectant, viscosity controlling

Officially, CosIng (the official EU ingredient database) lists Aluminum Hydroxide 's functions as opacifying(making the product white and non-transparent), as well as emollient and skin protectant.

However, with a little bit of digging, it turns out Aluminum Hyroxide often moonlights as a protective coating for UV filter superstar Titanium Dioxide. Specifically, it protects our skin from the harmful effects of nasty Reactive Oxygen Species (free radicals derived from oxygen such as Superoxide and Hydrogen Peroxide)generated when Titanium Dioxide is exposed to UV light. Btw, chlorine inswimming pool waterdepletes this protective coating, so one more reason to reapply your sunscreen after a dip in the pool on holiday.

Other than that,Aluminum Hydroxide also often shows up in composite pigment technologies where it is used the other way around (as the base material and not as the coating material) and helps to achieve higher color coverage with less pigment.

Phenoxyethanol

What-it-does: preservative

It’s pretty much the current IT-preservative. It’s safe and gentle, but even more importantly, it’s not a feared-by-everyone-mostly-without-scientific-reason paraben.

It’s not something new: it was introduced around 1950 and today it can be used up to 1% worldwide. It can be found in nature - in green tea - but the version used in cosmetics is synthetic.

Other than having a good safety profile and being quite gentle to the skin it has some other advantages too. It can be used in many types of formulations as it has great thermal stability (can be heated up to 85°C) and works on a wide range of pH levels (ph 3-10).

It’s often used together with ethylhexylglycerin as it nicely improves the preservative activity of phenoxyethanol.

Iron Oxides

Also-called: Ci 77491/77492/77499 | What-it-does: colorant | Irritancy: 0 | Comedogenicity: 0

A bit of a sloppy ingredient name as it covers not one butthree pigments: red, yellow and black iron oxide.

The triois invaluable for "skin-colored" makeup products (think your foundation and pressed powder) as blendingthese three shades carefully can produce almost any shade of natural-looking flesh tones.

P-Anisic Acid

What-it-does: preservative

Though the official function ofP-Anisic Acid is masking (meaning that it helps to mask not so nice smells in the product), according to manufacturer info it is rather used as a preservative. It is a skin friendly organic acid that works against fungi.

Chlorphenesin

What-it-does: preservative, antimicrobial/antibacterial

A little helper ingredient that works as a preservative. It works againstbacteria and some species of fungi and yeast. It's often combined with IT-preservative, phenoxyethanol.

Tocopherol - goodie

Also-called: Vitamin E | What-it-does: antioxidant | Irritancy: 0-3 | Comedogenicity: 0-3

  • Primary fat-soluble antioxidant in our skin
  • Significant photoprotection against UVB rays
  • Vit C + Vit E work in synergy and provide great photoprotection
  • Has emollient properties
  • Easy to formulate, stable and relatively inexpensive

Read all the geeky details about Tocopherol here >>

Disodium Stearoyl Glutamate

What-it-does: surfactant/cleansing

CeraVe Hydrating Mineral Sunscreen SPF 30 Face Sheer Tint Shade: Light ingredients (Explained) (5) We don't have description for this ingredient yet.

Propylene Carbonate

What-it-does: solvent, viscosity controlling

CeraVe Hydrating Mineral Sunscreen SPF 30 Face Sheer Tint Shade: Light ingredients (Explained) (6) We don't have description for this ingredient yet.

Citric Acid

What-it-does: buffering

Citric acid comes from citrus fruits and is an AHA. If these magic three letters don’t tell you anything, click here and read our detailed description on glycolic acid, the most famous AHA.

So citric acid is an exfoliant, that can - just like other AHAs - gently lift off the dead skin cells of your skin and make it more smooth and fresh.

There is also some research showing that citric acid with regular use (think three monthsand 20% concentration) can help sun-damaged skin, increase skin thickness and some nice hydrating things called glycosaminoglycans in the skin.

But according to a comparative study done in 1995, citric acid has less skin improving magic properties than glycolic or lactic acid. Probably that’s why citric acid is usually not used as an exfoliant but more as a helper ingredient in small amounts to adjust the pH of a formulation.

Caprylyl Glycol

What-it-does: moisturizer/humectant, emollient, deodorant

It’s a handy multi-tasking ingredient that gives the skin a nice, soft feel. At the same time, it also boosts the effectiveness of other preservatives, such as the nowadays super commonly used phenoxyethanol.

The blend of these two (caprylyl glycol + phenoxyethanol) is called Optiphen, which not only helps to keep your cosmetics free from nasty things for a long time but also gives a good feel to the finished product. It's a popular duo.

Capryloyl Salicylic Acid - goodie

Also-called: LHA | What-it-does: exfoliant

CeraVe Hydrating Mineral Sunscreen SPF 30 Face Sheer Tint Shade: Light ingredients (Explained) (7) We don't have description for this ingredient yet.

Caprylic/​Capric Triglyceride

What-it-does: emollient

A super common emollient that makes your skin feel nice and smooth. It comes from coconut oil and glycerin, it’s light-textured, clear, odorless and non-greasy. It’s a nice ingredient that just feels good on the skin, is super well tolerated by every skin type andeasy to formulate with. No wonder it’s popular.

Trisodium Ethylenediamine Disuccinate

Also-called: EDDS | What-it-does: chelating

A helper ingredient that helps to neutralize the metal ions in the formula (they usually come from water) so it stays nice longer. The special property of this particular ingredient is that it's more effective against more problematic ions, likeCu (copper) and Fe (iron) compared to less problematic ones like Ca (calcium) and Mg (magnesium).

Diethylhexyl Syringylidenemalonate

A handy helper ingredient that has photostabilizer properties. It is useful both for color-protecting products so that they do not change color for a long time as well as for stabilizing unstable sunscreen agents, such as famous UVA filter avobenzone.

DESM can also increase critical wavelength (the higher value means more UVA protection) in sunscreens and it canboostSPF by about 5 units in high-SPF products.

Disteardimonium Hectorite

What-it-does: viscosity controlling

An organic derivative of hectorite clay, Disteardimonium Hectorite is used as a viscosity controller - it thickens up formulations to make them less runny.

It’s most popular use in cosmetics is in sunscreens, under the trademarked name Bentone 38 from Elementis. According to the manufacturer info, it is a real multi-tasker, including the ability to prevent pigments settling during storage, stabilizing a formula for longer,creating a light and smooth skin feel andenhancing the water-resistance of sunscreen formulas.

Xanthan Gum

What-it-does: viscosity controlling, emulsion stabilising

It's one of the most commonly used thickeners and emulsion stabilizers. If the product is too runny, a little xanthan gum will make it more gel-like.Used alone, it can make the formula sticky and it is a good team player so it is usually combined with other thickeners and so-calledrheology modifiers (helper ingredients that adjust the flow and thus the feel of the formula). The typical use level of Xantha Gum is below 1%, it is usually in the 0.1-0.5% range.

Btw, Xanthan gum is all natural, a chain of sugar molecules (polysaccharide) produced from individual sugar molecules (glucose and sucrose) via fermentation. It’s approved by Ecocert and also used in the food industry(E415).

Phytosphingosine - goodie

What-it-does: skin-identical ingredient, cell-communicating ingredient, anti-acne, antimicrobial/antibacterial

It's a type of lipid, a so-calledsphingoid base that can be found naturally in the upper layer of the skin. It's found both in "free-form" and as part of famous skin lipids, ceramides.

There is emerging research about Phytosphingosine that shows that it has antimicrobial and cell-communicating properties and is considered part of the skin's natural defense system.

A 2007 study showed thatPhytosphingosine even works againstevil acne-causing bacteria,Propionibacterium acnes and shows promise as a complementing active ingredient in treating acne-prone skin thanks to its anti-inflammatory and antimicrobial activities.

A nice one to spot in the ingredient list. :)

Polyhydroxystearic Acid

What-it-does: emulsifying

A so-called dispersant or dispersing agent that's used in inorganic (titanium dioxide/zinc oxidebased) sunscreens or in make-up products to help to distribute the pigments nicely and evenly on the skin. It's also claimed to increase the UV absorption of the sunscreen formula as well as to reduce the annoying white cast left behind by inorganic sunscreens.

Benzoic Acid

What-it-does: preservative

An Ecocert-approved, natural preservative that counts as gentle and non-irritating to the skin. Usually, it comes to the formulaas part of a preservativeblendas it's not enough on its own.

CeraVe Hydrating Mineral Sunscreen SPF 30 Face Sheer Tint Shade: Light ingredients (Explained) (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Golda Nolan II

Last Updated:

Views: 5715

Rating: 4.8 / 5 (78 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Golda Nolan II

Birthday: 1998-05-14

Address: Suite 369 9754 Roberts Pines, West Benitaburgh, NM 69180-7958

Phone: +522993866487

Job: Sales Executive

Hobby: Worldbuilding, Shopping, Quilting, Cooking, Homebrewing, Leather crafting, Pet

Introduction: My name is Golda Nolan II, I am a thoughtful, clever, cute, jolly, brave, powerful, splendid person who loves writing and wants to share my knowledge and understanding with you.